EnterpriseXG 24
USW-EnterpriseXG-24
A 24-port, Layer 3 switch capable of supporting high-capacity 10 GbE RJ45 and 25G SFP28 connections.

(24) 10 GbE ports

(2) 25G SFP28 ports

DC power backup-ready

Layer 3 switching

Installation Guide
Technical Specifications
Mechanical
Dimensions442 x 285 x 44 mm (17.4 x 11.2 x 1.7")
WeightWithout mounting brackets: 4.5 kg (9.9 lb)
With mounting brackets: 4.6 kg (11 lb)
Enclosure materialSGCC steel
Hardware
Management interfaceEthernet In-Band
Networking interface(24) 1/2.5/5/10 GbE ports
(2) 25G SFP28 ports*
*Don't support mixed speed at 25 Gbps mode. Once one of the ports is configured at 25 Gbps mode, the others will be limited at 25 Gbps too. Supports mixed speed when all ports are at 1 or 10 Gbps.
Total non-blocking throughput290 Gbps
Switching capacity580 Gbps
Forwarding rate431.52 Mpps
Power method(1) Universal input, 100—240V AC, 2A Max., 50/60 Hz
(1) USP-RPS DC input, 11.5V DC, 8.7A
Power supplyAC/DC, internal, 100W
Supported voltage range100—240V AC
Max. power consumption100W
ServicesSMB Layer 3 GbE switch
ESD/EMP protectionAir: ± 16kV, contact: ± 12kV
LCM display(1) 1.3" color touchscreen
ButtonFactory reset
Ambient operating temperature-5 to 40° C (23 to 104° F)
Ambient operating humidity10 to 95% noncondensing
CertificationsCE, FCC, IC
Switching Features
Layer 2 featuresIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 featuresDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
LEDs
SystemStatus
EthernetLink/activity
Application Requirements
UniFi Network Version 6.1.67 and later